Comet H0530 - thermometer with Ethernet interface and relays Distributor, Supplier, Supply, Supplies Comet Transmitters and Regulators ~ Mobicon-Remote Electronic Pte Ltd

Comet H0530 - thermometer with Ethernet interface and relays

3 / 144

Quantity

Download Files

code: H0530
Ambient temperature Ethernet sensor with two relay outputs.

Sensor H0530 is designed for online monitoring of temperature. Three binary inputs to detection of two-states signals are the advantage. Other devices are controlled by two relay outputs.

Included in delivery:

H0530 sensor
Traceable calibration certificate
Quick start manual
Technical support at discussion forum

Technical parameters	Value
Output	Ethernet
Measured Value	Temperature
Construction Type	Ambient Air
Design	Industrial
Temperature Measuring Range	-30 to 80 °C
Relay Output	Yes
Two-State Input	Yes
Lcd Display	Yes
PoE	No
Accuracy of temperature output	±0.4°C
Resolution	0.1°C
Measuring interval	2s
Available temperature units	degrees Celsius, degrees Fahrenheit
Temperature operating range	-30 to +80°C
IP protection	IP40
Number of relay outputs	2
Maximum switching voltage, current and power of the relay output	50V, 2A, 60VA
Number of binary inputs	3
Signal for binary inputs	dry contact, open collector or two-state voltage signal. Inputs are not galvanically isolated.
Minimum pulse length at binary input	500ms
Low voltage level at binary input	0 to +0.5V
High voltage level at binary input	+3.0 to +30V
Audible alarm	built-in beeper - switchable
LAN connection	RJ-45 connector, 10Base-T or 100Base-TX
Communication protocols	WWW, ModbusTCP, SNMPv1, SOAP, XML
Alarm protocols	E-mail (SMTP authentication is supported), SNMP Trap, Syslog
Configuration	WWW interface, T-Sensor
Temperature operating range of LCD display	readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Power	9 to 30Vdc, maximum consumption 1W
Power connector	co-axial, diameter 5.5 x 2.1mm
Dimensions	136 x 191 x 45mm (W x H x D), stem length 53mm
Weight	approximately 340g