50 Ubi Ave 3,
#02-06 Frontier,
Singapore 408866.
+65-67477472
+65-67476768
Previous | 17 / 144 | Next |
For external Pt1000 temperature probe. Three two-state inputs.
Included in delivery:
Technical parameters | Value |
---|---|
Output | RS232 |
Measured Value | Temperature |
Construction Type | For External Temperature Probe Pt1000 |
Design | Industrial |
Temperature Measuring Range | -200 to 600 °C |
Relay Output | Yes |
Two-State Input | Yes |
Lcd Display | Yes |
PoE | No |
Maximum switching voltage, current, power of relay output | 50V, 2A, 60VA |
Audible alarm | from built-in beeper - switchable |
Accuracy of temperature intput without probe | ±0,2 °C |
Available temperature units | degrees Celsius, Fahrenheit |
Signal for binary inputs |
dry contact, open collector or two-state voltage signal. Inputs are not galvanically isolated. |
Minimum pulse length at binary input | 500 ms |
Voltage at open contact | 3.3 V |
Low voltage level | 0 to +0.5 V |
High voltage level | +3.0 to +30V |
Temperature operating range | -30 to +80°C |
Temperature operating range of LCD display | readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C |
Communication protocol | ModBus RTU and Advantech ADAM compatible protocol |
Communication speed | 110 to 115200 Bd |
IP protection | IP65 |
Power | 9-30Vdc, power consumption approximately 1W |
Dimensions | 136 x 160 x 45 mm (W x H x D) |
Weight | approximately 430g |