Visit
Official Website

Mobicon-Remote Electronic Pte Ltd
50 Ubi Ave 3,
#02-06 Frontier,
Singapore 408866.
+65-67477472
+65-67476768

Comet H4431 Temperature transmitter with RS485 output

Previous 18 / 144 Next

Quantity
Add Quotation


Download Files

Cometsystem_H4431.pdf (557.96 KB)
code: H4431
Temperature transmitter for Pt1000 sensors with two relay outputs. Outdoor, indoor use.
 

For external Pt1000 temperature probe. Three two-state inputs.

Included in delivery:

  • H4431 sensor
  • Traceable calibration certificate
  • Quick start manual
  • Technical support at discussion forum
Technical parameters Value
Output RS485
Measured Value Temperature
Construction Type For External Temperature Probe Pt1000
Design Industrial
Temperature Measuring Range -200 to 600 °C
Relay Output Yes
Two-State Input Yes
Lcd Display Yes
PoE No
Maximum switching voltage, current, power of relay output 50V, 2A, 60VA
Audible alarm from built-in beeper - switchable
Accuracy of temperature intput without probe ±0,2 °C
Available temperature units degrees Celsius, Fahrenheit
Signal for binary inputs dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
Minimum pulse length at binary input 500 ms
Voltage at open contact 3.3 V
Low voltage level 0 to +0.5 V
High voltage level +3.0 to +30V
Temperature operating range -30 to +80°C
Temperature operating range of LCD display readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Communication protocol ModBus RTU, ARION and Advantech ADAM compatible protocol
Communication speed 110 to 115200 Bd
IP protection IP65
Power 9-30Vdc, power consumption approximately 1W
Dimensions 136 x 160 x 45 mm (W x H x D)
Weight approximately 350g

Optional accessories

Description
AC/DC adapter 12V/450mA stabilized
COMETEO Multi-Plate Radiation Shield for Sensors, Naturally Ventilated
The LD-12 flood detector
The optical smoke detector SD-280
Motion detector JS20
Magnetic door contact SA-200-A
Magnetic door contact with cable length 2m
Magnetic door contact with cable length 5m
Magnetic door contact with cable length 10m
Magnetic door contact with cable length 15m
Magnetic door contact with cable length 20m
Magnetic door contact with cable length 30m
Power detector SP008
Tool for easy connection to WAGO terminals 233 for serial output transmitters
Converter USB/RS485 for MS5


You have 0 items in you cart. Would you like to checkout now?
0 items